Aristarco ESD Hood-Type Dishwasher

High Performance ESD Hood-Type Dishwasher from Aristarco.

This Aristarco dishwasher has been tested & complies with the requirement of current building code of Australia NCC2025-Part1, subject to conditions and limitations listed in certification document. Testing conducted independently by Australian National Testing Laboratories PTY LTD (ANTL) – Test report 5608.13.

Included Accessories:
- 1 x flat cup basket 500 x 500mm
- 2 x peg plate basket 500 x 500mm
- 2 x cutlery inserts
- 1 x water inlet hose, length 1.5m
- 1 x drain hose, length 2.0m
- Fitted with 150mm adjustable legs

Optional Accessories:
- Twin hood system
- Remote interface
- Inlet and outlet benches
- Additional baskets

• High performance hood-type dishwasher with pre-fitted, easy to install energy savings device (ESD)
• Electronic Smart Interface - with LED display and multicoloured start button
• PRS System: break tank, 316 atmospheric boiler, rinse booster pump
• HD System: for maximum uninterrupted performance
• Double skin insulated hood
• Four wash cycles 90/120/180 seconds, and 9 minute deep clean
• Green standby function that reduces energy consumption when idle
• Low water consumption of 2.5 litres per cycle, minimising water, energy and detergent use
• Pressed wash tank with rounded corners, for increased hygiene
• Stainless steel wash and rinse arms
• Robust upper tank scrap filters in stainless steel
• Manual lift with fully enclosed rear, 3 spring support
• Automatic drain pump with self-cleaning function
• Vertical self-draining wash pump
• Built in thermostop, ensures correct rinse temperatures
• Built in detergent and rinse-aid injection
• This Aristarco dishwasher has been tested & complies with the requirement of current building code of Australia NCC2025-Part1, subject to conditions and limitations listed in certification document. Testing conducted independently by Australian National Testing Laboratories PTY LTD (ANTL) – Test report 5608.13.
• 24-months parts and labour warranty

Note: The enclosure must have a minimum of 180 l/s of the air replaced by either general exhaust ventilation, supply ventilation, natural ventilation, or a combination of these. Where other heat or steam-generating appliances share the enclosure or room, the airflow must be increased to accommodate those appliances. Note: The room requirement for multiple units may not be the “l/s air” sum of the tested individual units.