Stoddart Plumbing Microwave Sensor Flushing Device for Urinals - Single Feed FD.EUSF.MIC

A ceiling sensor activated Microwave Sensor urinal flush device, suitable for flushing slab urinals with tube spreaders. The Flush valve kit includes one ceiling sensor, one controller module, connection cables and one 12V DC transformer.

Depending on the water supply conditions, flow rate requirements or length of urinal additional SV-6.1 flush valves or Flush Valve Kits can be added. The flush valve can be operated directly off the mains water supply. The detection area of the ceiling mounted sensor is very defined and detects persons only in the immediate vicinity along the face of the urinal.

This feature enhances water conservation due to more precise detection. After detection, a flush cycle is automatically activated. Activating a flush cycle does not mean that the urinal is immediately flushed. The time-delay until flushing is fully adjustable between 1 to 20 minutes. During the flush-delay period additional users will not trigger new flush cycles, a feature which enhances water conservation benefits.

• 1/2 inch mains water supply eliminating the need for a cistern
• Concealed installation for vandal resistance
• Adjustable sensor range and flush volume
• Microwave sensor designed to penetrate through most roof and wall surface materials including plaster & timber, not including steel

• Single feed unit compatible with Stoddart Urinals 1800mm long and under

  General

  Brand

  Stoddart Plumbing Products

  Amp Plug

  10A

  Specification

  Sensor Number

  1